|
Challenger™ Troughs and end plates are fabricated of 304 or 316
stainless steel. The plates are straight-line polished and then rolled
to match the radius of the agitator. All structural components are continuously
welded inside and outside the mixer to eliminate voids where contaminants
may be trapped. The end plate, which is adjacent to the mixer drive, is
secured with a bolted flange for future maintenance of the agitator. Bearing
plates, gussets and structural tubing legs are straight-line polished
and continuously welded. During final assembly, all welds are chemically
passivated and the mixer is brushed to a high-luster finish.
| Challenger™ Troughs | Bearings
| Seals | Valves | Challenger™
Agitators | Challenger™
High Speed Choppers | Challenger™
Safety Devices
| Hoods & Covers
Lowe Industries Inc.
3575 3rd Avenue
PO Box 626
Marion, Iowa 52302
Phone: 319-447-9724
Fax: 319-377-1204
|
